Product description：

Wood fibers are easily dispersed in insulation materials to form three-dimensional results, and can adsorb 6-8 times the weight of moisture. This structure and characteristics improve the material's easy-to-use performance, operational performance, anti-sliding performance, speeding up the construction speed; the size stability and thermal stability of lignocellulosic fiber play a very good role in thermal insulation material insulation and crack resistance; the moisture transfer function of lignocellulosic fiber makes the slurry surface and the interface between the base layer hydration reaction sufficient. Thus, the surface strength of the thermal insulation material, the bond strength to the base layer and the uniformity of the material strength are improved. These properties make wood fiber an indispensable additive in thermal insulation materials.

Performance parameters:

Physical parameters

The length is less than 1mm

Ash content is less than 11%.

PH 7.5 + 1

The water absorption rate is not less than 6~8 times the weight of the fiber itself.

The moisture content is less than 5%.

Heat resistance is 230 C (short time up to 280 C).

Effect of building wood fiber

1. strong thickening enhancement effect

2. improve operational performance

3. crack resistance

4. low contraction

5. good liquid forced adsorption capacity.

6. anti fall

7. easy to disperse

application area

Insulation mortar base

Seepage control and anti cracking concrete

Cement based plastering mortar

Ceramic tile adhesive

Self leveling ground material

Masonry mortar

Sealant

Used for shotcrete.

Gypsum based plastering mortar and gypsum products.

Used for paints and asphalt materials.

Wall mortar surface

Reference dosage

Internal and external wall water-resistant putty powder: 0.3 to 0.5% tons per ton.

External wall insulation mortar: 0.4 ~ 0.5% tons per ton.

Ceramic tile and floor tile adhesive: 0.2 ~ 0.5% tons per ton.

Caulking gypsum: 0.3 ~ 0.6% tons per ton.